MAD130B-0150-SA-C0-DK0-35-N1

Product Description

Among the well-known servo motors of Rexroth Bosch Group, MAD130B-0150-SA-C0-DK0-35-N1 is the one with a variety of industrial applications. As it is an asynchronous motor, it can self-start without any external assistance. 

It has a winding of 0150 and the size of this motor is 130. The length is B and the mass value without holding the brake but with a fan is 100 kg. The cooling in this motor is facilitated by axial fans in which current flows from B to A direction to blow out the heat from the motor. The fan requires a connection voltage of somewhere between 3 × 400 V +- 15 % to 3 × 480 V +- 10%. The power consumed by axial fans ranges between 139 VA to 208 VA and the medium air voltage of the fans is 1000m3/h. However, the holding brakes are absent due to which the motor may encounter unexpected movement of the driven load when it is de-energized but a shaft sealing ring is present to avoid leaking. The shaft is also balanced with the half-key to ensure smooth operation, increased efficiency, and minimal vibration when the motor is rotating. It can be mounted to any surface by foot or flange as both options are available. It is equipped with an incremental encoder with 2048 increments and the discharge capacity of MAD130B is 15.8 nF.

The key speed of the motor is 1000 revolutions per minute but because of standard bearings, it can rotate at up to 7500 revolutions per minute. The power wire cross-section is 6 mm2 and the number of pole pairs is 3. The moment of inertia of this motor is 0.084 kgm2 and the duty cycle time is 10 minutes.