MAD130B-0100-SA-S2-AL0-05-N1

Product Description

MAD130B-0100-SA-S2-AL0-05-N1 is a Bosch Rexroth MAD series asynchronous motor. It complies with vibration severity A according to DIN EN 60034. Vibration severity is a measure of the level of vibration present in a rotating electrical machine, such as a motor or generator. DIN EN 60034 specifies several levels of vibration severity, including vibration severity class A. According to DIN EN 60034, vibration severity class A is the lowest level of vibration that is acceptable for a rotating electrical machine. Machines that fall into this class are expected to have low levels of vibration and are considered suitable for most applications. To determine the vibration severity class of a machine, measurements are taken using specialized equipment, such as accelerometers, which measure the acceleration of the machine's casing or bearings.

The results are compared to the vibration severity limits specified in DIN EN 60034, which vary depending on the size and speed of the machine. If the measured vibration levels are within the limits of class A, the machine is considered to be in good condition and suitable for its intended application. If the vibration levels exceed the limits of class A, further analysis and corrective action may be necessary to address the underlying issue causing the excessive vibration.

 The MAD130B-0100-SA-S2-AL0-05-N1 motor’s frame size is 130 and frame length is B. The motor winding code is 100. The motor cools via surface cooling and relies on a factory-fitted axial fan. It is equipped with a singleturn absolute encoder and supports digital servo feedback. The main electrical connector is on side A of the housing. The main shaft is without a shaft seal and is balanced with a half key.