Product Description
The MAD130B-0050-SA-S2-BG0-05-V1 is an average-sized AC motor by Rexroth that delivers surprisingly high mechanical output at a wide speed range. Derived from the MAD motor series, the MAD130B-0050-SA-S2-BG0-05-V1 has a frame size of B with a total dimension of 570 mm and a mass of 105.2 kilograms. It features a pilot diameter of 260 millimeters and a reinforced bearing, suitable for driving high radial loads such as pulleys. For MAD motors with a frame size of 130B and a reinforced bearing, the minimum radial load is 1000 N. The maximum allowable radial force for this motor model, however, depends on certain factors such as the force's point of application, shaft design, and average speed.
The MAD130B-0050-SA-S2-BG0-05-V1 has a sealing ring on its output shaft and runs at a base speed of 500 rpm. Although MAD motors can tolerate radial loads higher than 1000 N, they have relatively low axial load tolerance. For instance, the MAD130B-0050-SA-S2-BG0-05-V1 can only permit an axial force of 50 N during operation. For this reason, this machine may not be suitable for punching or drilling applications. What the MAD130B-0050-SA-S2-BG0-05-V1 lacks in speed, it compensates for its powerful torque profile. At its rated power output of 5 kW, the motor shaft transmits a corresponding torque output of 95 Nm.
Unlike other MAD motors by Rexroth, the MAD130B-0050-SA-S2-BG0-05-V1 experiences no derating because its key speed is equal to its rated speed. For this reason, the machine's standstill torque and current values are approximately equal to their corresponding nominal values. Although the MAD130B-0050-SA-S2-BG0-05-V1's rated torque is 95 Nm, the motor may be configured to deliver much higher torque up to a maximum value of 208.8 Nm.
Wake Industrial Warranty
