Product Description
The MAD100D-0250-SA-M2-AP1-35-N1 asynchronous housing motor by Bosch Rexroth should not be operated for applications that are not supported by the manufacturer. This motor can be operated in forming machines. The product is meant to be handled only by qualified or trained personnel. This device may get damaged if the specified safety instructions are not followed. The unit encompasses a 24 Nm holding brake. Its fan cools the motor by using cool air from the surroundings. This motor deploys the blowing action for its fan operation.The product tends to get thermally overloaded if the flow rate of the fan is lowered. This device is designed in compliance with DIN EN 60034-1 specifications. The unit is connected to only one temperature sensor at a time. Its sensor triggers a warning when the motor surface temperature reaches 110 degrees C.
This motor does not support the use of its holding brake as a service brake. The product can function like a main spindle motor. This device can be associated with only a load torque that is lesser than the minimum dynamic moment provided by the holding brake. The unit encompasses an encoder with an EnDat 2.1 interface. It supports low shaft-hub requirements.This motor is balanced with a full key. The product comes with a PTFE shaft sealing ring. This device portrays a low-noise running action for its bearings. This device supports an axial shaft load of up to 30 N. The unit has a reduced bearing life if the ambient operating temperature range is not maintained. Its connectors must not be connected or disconnected in the energized state. This asynchronous housing motor features insulation resistance as per EN 60204-1 specifications.
Wake Industrial Warranty
