Product Description
The torque produced by MAD100D-0200-SA-M2-BH0-05-N1 is 54 Nm and the power produced is 11.3 Kw, while the maximum torque runs at 130 Nm and the output maxes out at 23.2 Kw. The electrical connection has its connector set in side B. The motor type is plain shaft type and without a shaft sealing ring. The continuous torque at standstill is 59 Nm & continuous current at standstill 28.7 A. The mass of the motor is 72 kg. The insulation class according to DIN EN 60034-1 is 'F'. & the motor protection class is IP 65 rated.
With the standard 'N' bearings the maximum radial load that this motor can accommodate is 30N while with reinforced bearings can reach up-to 800N. The mechanical service life of the bearings operating under standard conditions is 30,000 operating hours. For holding the motor when not in use these motors come with an option of either a electrically released or and electrically clamped holding brake as per the requirement of the customer.
These motors come in a carefully curated crates or carton made of wood or carboard for safe delivery of the same, for extra safety these are secured using retaining straps on the pallets. The motors go through vigorous testing on various parameters to ensure smooth working of the motor, namely the; high voltage test, insulation resistance test which come under the electrical testing. For the mechanical testing the vibration test is an essential test to ensure the motor does not increase the specified vibration range under high load application. For seamless mounting and integration to drive elements, a concentricity and position tolerance becomes essential.
Wake Industrial Warranty
