Product Description

The AC motor MAD100D-0150-SA-S2-AH0-05-A1 is manufactured by Bosch Rexroth. This servo motor has a discharge capacity of 11.5 nanofarads (nF). This specification relates to the capacitance of the motor's power connections (U, V, W) to the motor housing. It is vital to know the motor's electrical properties, especially how it manages electrical discharges. The motor's insulation class is 155 (F), indicating the highest temperature the motor's winding insulation can sustain continuously without degrading. In this situation, the insulation is rated for a maximum temperature of 155 degrees Celsius. Additionally, the motor contains three pole pairs, a basic design component that determines the motor's speed and torque characteristics.

The required power cable cross-section is 4.0 square millimeters (mm^2). This is the minimal cross-sectional area of the power cables required to properly carry the motor's rated current. Finally, the motor has a mass of 72.0 kilograms (kg), a key aspect to consider when planning the motor's installation and integration into a system. This motor is intended to run at a rated speed (nN) of 1500 revolutions per minute (rpm). This is the speed at which the motor provides its rated power and torque for continuous operation. The motor may be driven to a maximum speed (nmax) of 9000 rpm with an H bearing, however, this is normally limited for short periods or particular purposes.

In terms of torque and power, this servo motor has a maximum torque (Mmax) of 140.8-newton meters (Nm). This is the highest torque the motor can deliver, generally for short durations during acceleration or while overcoming large loads. The maximum power (PS6max) of 19.07 kilowatts (kW) is the utmost mechanical power output the motor can deliver, often under certain voltage and load circumstances. It's vital to remember that these maximum values could not be sustainable for continuous operation owing to thermal restrictions. We provide a one-year warranty when you buy this product.