Product Description
The MAD100D-0100-SA-M2-AP1-05-N1 asynchronous servo motor from Bosch Electric is an 84 Nm motor that requires between 169 volts AC to 475 volts AC to operate with a 3-phase input connection and an input frequency rating of 50 to 60 Hz. This particular servo motor model has a winding designation 0100 that allows this motor to have a power rating of 8.8 kW along with a nominal current requirement of 25.1 amperes while providing a speed of 1000 rpm. Under non-rated or derating mode, the MAD100D-0100-SA-M2-AP1-05-N1 asynchronous servo motor has a derating speed of 500 rotations per minute. For derated operating conditions, the MAD100D-0100-SA-M2-AP1-05-N1 servo motor has a derated speed rating of 1000 rpm. This motor has a low inertia design providing a rotor moment of inertia of 0.032 kg·m² which ensures smooth operation and allows the ability to motor rapidly change the speed at any given instance or during a change in the load connected at the end of the shaft.
The multiturn absolute encoder on this servo motor allows the motor shaft to rotate 2048 fine steps in one single rotation while it can rotate up to 4096 times making it a multiturn configuration. The maximum revolutions this servo motor can perform is 4096 revolutions. This encoder relies on the EnDat 2.1 digital encoder interface for communication and data transmission. The Ingress Protection of IP 65 makes sure that this servo motor remains dry and dust-free when installed in industrial environments which may pose a threat to the performance of this servo motor. The maximum humidity this servo motor can withstand is 90 %.
Wake Industrial Warranty
