Product Description
The MAD100C-0250-SA-S2-BP0-05-N4 is an Indramat Rexroth-manufactured asynchronous motor with surface ventilation by a solidly connected fan unit. The variant has no holding brakes and the overall mass of the motor is 59 kg. The motor speed is 2500 rpm with a key speed of 2000 rpm and a maximum speed of 9000 rpm with universal bearings. There are 3 pole pairs in this variant of the motor. The cooling inside the motor is implemented using an axial blower.
The operating modes in MAD100C-0250-SA-S2-BP0-05-N4 are S1 and S6. The motor has dual positive temperature coefficient sensors. The thermal time constant is half an hour (30 minutes), and the duty cycle time at 66% periodic operation is 10 minutes. The permitted transport temperature range is from -20 degrees C to +80 degrees C. The electrical connection is at connector side B and the power wire cross-section area is 4 mm2. It has a driven shaft with a sealing ring and is balanced with the entire key. The life of the sealing ring depends on the cleaniness. Rexroth advised to prevent the sealing point from becoming dry and dirty. For longer use and operation, it is advised to ensure proper cleanliness and lubrication. The sealing material used in MAD100C-0250-SA-S2-BP0-05-N4 is polytetrafluorethylene. The maximum torque of this variant is 99 Nm. Rexroth company recommends the vibration tolerance data for continuous induction motor operation. The maximum value for sin shaped operations in case of radial is 0.75 mm amplitude at 0 - 55 Hz, and acceleration of 30 m/s2 at 55 - 2000 Hz according to DIN EN 60721-3-3 and DIN EN 60068-2-6. In environmental factor case, Rexroth recommends class 3k4 that mentions air humidity levels.
Wake Industrial Warranty
