Product Description
MAD100C-0250-SA-S2-BH0-35-N4 is one of the asynchronous motors manufactured by Rexroth Bosch Group. The winding of this motor is 0250 and the size is 100. The length is represented by C and the mass without holding the brake but with a fan is 59 kg.
The rated torque production is 40 Nm and the value for rated power is 10.5 kW. The maximum amount of electrical current this motor can safely handle under normal operating conditions is referred to as rated current and its value is 27.8 A but it can exceed up to 44.9 A. The key speed of the MAD100C motor is 2000 revolutions per minute and the rated speed is 2500 revolutions per minute. However, the maximum speed value with bearings is 9000 revolutions per minute. When the motor is at rest, the motor produces 45 Nm of continuous torque and consumes 27.8 A of the current. The duty cycle time is 10 minutes and the thermal time constant is 30 minutes. There are 3 pole pairs present and the power wire cross-section is 4 mm2. The F-class insulation ensures that the MAD100C can withstand 155 ℃ of temperature and the IP65 motor protection class represents that the motor is completely protected against dust infiltration and can withstand low-pressure water jet sprays from any direction. It has a single-turn absolute encoder with 2048 increments and the connector for electrical connection is present on the B side of the motor.
It has no holding brake and the shaft sealing ring is also absent. It can be mounted flange to any surface as well as the foot mounting option is also present. It has standard bearings and the cooling of the heating components is executed with the help of axial fans.
Wake Industrial Warranty
