Product Description
The MAD100C-0200-SA-S2-AP1-05-N1 asynchronous housing motor offered by Bosch Rexroth uses an encoder with a single turn for feedback. This motor is equipped with a holding brake to support its operation. The product shows signs of vibrations if its mount has become loose. This device is manufactured using resource-optimized production processes. The unit depicts reduced output when the ambient operating conditions are exceeded. Its maintenance should not be undertaken when the machine in which it is running is in a de-energized state. This motor comprises ball bearings with a lifespan of 30,000 operating hours.
The product should be restarted only after ensuring that its surface temperature is 40 degrees C. This device may have an excessively high housing temperature if there is a change in its original parameters. The unit needs a resurfacing of its holding brake to be carried out if the storage period is more than a year. Its holding brake is ready for operation when its holding torque has been reached. This motor-related maintenance tasks can be carried out only after disconnecting the electrical connections of its fan. The product is likely to get damaged if repeated high-voltage inspection tests are carried out on it. This device meets UKCA Requirements. The unit is balanced dynamically according to EN60034-14 specifications. Its protective sleeves are meant to be removed only just before assembly.
This motor experiences a premature failure of its bearings because of reduced grease lifetime. The product does not allow a direct fitting of bevel gear pinions on its output shaft. This device should always be used in its original state without any structural modifications. The unit can be installed vertically with the output shaft facing upwards or downwards. Its maximum permitted radial force is based on the shaft design and force action point. This asynchronous housing motor portrays low-noise running and is ideal for high-speed operation.
Wake Industrial Warranty
