MAD100C-0200-SA-S2-AH0-35-A1

Product Description

The servo motor MAD100C-0200-SA-S2-AH0-35-A1 is manufactured by Rexroth Bosch. This motor can apply a torque of 45 Nm to turn something, this is its Rated Torque (MN). However, the Maximum Torque (Mmax) is equal to 105 Nm, it is the absolute most torque produced by this motor for a short time period. When it comes to its power, the rated power (PN) of this device is 9.4 kilowatts. It refers to the work this motor can handle over time. The amount required to operate this module to work at its rated power is called Rated Current (IN). The value of the rated current of this motor is equal to 25.7 A.

The measure of how fast this servo motor can spin is given by its Rated Speed (nN) which is calculated in revolutions per minute. Its value is 2000 rpm. The Key Speed (n1) of this servo motor is 1500 rpm. After this speed the torque will start to decrease. The Pmax value of this module is equal to 19.3 kilowatts. This is Maximum Output (Pmax) the device can produce for a short time. While, the maximum current (Imax) is equal to 47.3 A which marks its maximum electrical current.

The cross-sectional area of the power wire supplying current to this device is 4 square millimeters. This is the thickness of the wire. The duty cycle time (TC) of this motor is 10 minutes. The motor can run at full power for 10 min without rest. The Moment of Inertia of this device is 0.0284 kgm². This value gives you a measure of how hard it is to change the speed. The maximum speed of this motor at which it can spin safely is equal to 9000 rpm.