MAD100C-0150-SA-S2-EH0-05-H1

Product Description

The MAD100C-0150-SA-S2-EH0-05-H1 is a AC servo motor from Bosch Rexroth MAD series. This motor has a rated torque of 48 Nm with a torque constant of 2.94 Nm/A at the environmental temperature of 20 °C. The motor uses 7.5Kw power to run smoothly and draws a continuous current of 19.7 amperes. The motor has a rated speed of 1500 rpm with a derating speed of 1000 rpm. The motor provides a continuous torque of 50 Nm at the stand-still position and uses 13.8 amperes in this position. The motor has the capacity to hold the moment of inertia of 0.0284 kgm².

This motor has 3 pairs of poles and it requires a 2.5 mm² cross-section input power cable for uninterested operate. This motor has a high-speed bearing installed in it and a vibration severity grade of R. the motor generates a noise of 70 decibels which is measured at a distance of 1m. this noise is produced when the motor operates at 4KHz. The working temperature of the motor is 0 to +40 °C and it is recommended to store it as a temperature of -20 °C to +80 °C.

The motor comes with a built-in absolute encoder. This encoder is used to control the motor speed and its rotation by providing this information. The encoder has a resolution of 2048 increments per rotation. The motor uses a blower aligned with its rotational axis for cooling purposes. It consumes a power of 100 VA and draws a current of 0.12 amperes. The blower has the capability to provide a good airflow rate of 230 m³/h. the motor has a flange mounting with a size of 100.