Product Description
The MAD100C-0150-SA-N0-HP0-05-N1 is an AC servo motor manufactured by Bosch Rexroth. This device has a sound pressure level of 70 dB(A) (+3) measured 1 meter away from the motor. The duty cycle time (S6-44%) (TC) of this device is equal to 10 minutes. The discharge capacity (Cab) of this device is 8.13 nF (nanofarads). This measures the capacitance measured between the motor's electrical windings and its metal housing. The rated speed (nN) of this servo motor is 1500 rpm (revolutions per minute). Operating the motor at the rated speed ensures optimal performance and efficiency.
This device has a key speed (n1) of 1000 rpm. Below the key speed, the motor delivers its rated torque. Above the key speed, the torque decreases. The value of the rated power (PN) for this motor is 7.5 kW (kilowatts). It is the mechanical power the motor can deliver at its rated speed and torque. This device has 3 pole pairs (p) which determine its synchronous speed. With 3 pole pairs and a frequency of 50 or 60 Hz, the synchronous speed would be 2000 or 2400 RPM, respectively. However, the rated speed (nN) is 1500 RPM which is lower than the synchronous speed due to a phenomenon called slip. Slip is necessary for torque generation in induction motors.
The Cross-Sectional area (A) of the power wire is 2.5 mm2. The moment of inertia (Jrot) of this module is equal to 0.0284 kgm2. The maximum torque (Mmax) the motor can produce is 110 Nm. The motor can deliver 15.4 kW of maximum mechanical power. This motor can handle a maximum Current (Imax) equal to 39 A for short durations. The Maximum Speed (nmax) this motor can safely reach with standard bearings is 9000 rpm. This industrial-grade servo motor is backed by a robust one-year warranty for your peace of mind.
Wake Industrial Warranty
