Product Description
Rexroth Bosch manufactures the MAD100C-0050-SA-M2-AG1-05-N1 servo motor. The rated torque (MN) of the servo motor is 51.0 Nm. This is the torque that may be used in continuous operating mode at the rated speed (S1). Put otherwise, it refers to the maximum rotational force that a motor is capable of producing continuously at its specified speed. Furthermore, the motor's rated power (PN), or the maximum output power it can maintain under these specified parameters, is 2.70 kW. Moreover, 8.2 A is the rated current (IN). When the motor is running at its rated power and torque, it uses this much electrical current.
The motor is intended to provide its rated torque and power at a speed of 500 1/min, or the rated speed (nN). Furthermore, this motor does not derate or incur a torque loss before reaching its rated speed since its key speed (n1) is 500 1/min. Additionally, the unit has three pole pairs (p) in its architecture. This is a reference to the motor's number of magnetic pole pairs, which affects its torque and speed characteristics. There are 1.5 mm2 in the power wire cross-section (A). In order to guarantee that the wires used to power the motor can withstand the specified current without overheating, this is the required cross-sectional area of the wires.
The motor's mass (mmot) of 59.0 kg is another factor that should be taken into account while designing the system and installing it. Lastly, with a bearing N (nmax) of 3,000 1/min, the servo motor may reach its maximum speed. This is the maximum speed at which this kind of bearing may be used to drive the motor safely. The maximum torque (Mmax) of the motor is 112.3 Nm, which is the most torque it can momentarily provide. In a similar vein, the motor's maximum power (PS6max) of 5.54 kW indicates its maximum power output. Finally, the motor's maximum current (Imax(eff)) is 15.9 A, the most current it can manage for brief periods of time without suffering harm. Wake Industrial offers a year-long warranty.
Wake Industrial Warranty
