MAD100B-0250-SA-S2-HH0-35-N1

Product Description

The MAD100B-0250-SA-S2-HH0-35-N1 is a 2500 rpm rated speed asynchronous motor with a weight of 43 kg. It has a rated torque of 25 Nm with continuous torque at a standstill value of 28 Nm. The key speed of the motor is 2000 rpm and the moment of inertia is 19 x 10-3 kgm2. The cooling method of this variant MAD100B-0250 is an axial fan, blowing, and the plain shaft without a shaft sealing ring. The operating current withdrawn capacity of the fan at running condition is 0.12 A. The medium air voltage is 230 m3/h. The voltage connection uses 400 v as well as 480 v three-phase supply at 50/60 Hz frequency. 

The bearing used in MAD100B-0250-SA-S2-HH0-35-N1 is standard. It has an inbuilt single-turn encoder and the increment of the encoder is 2048. The length of the motor is B and the size is 100. The maximum torque it can offer is 61 Nm with maximum power output of 13.3 kW. The continuous current at a standstill is 16.2 amperes. The motor has the insulation of class F with motor protection of IP 65 class. It is best to take the motor at room temperature, however, the recommended temperature range is from 0 C to 40 C. 

The motor poles dictate the speed as a larger number of poles leads to less rpm. This variant of the motor has 3 pairs of poles and the discharge capacity is 6 nF. The rated power is 6.5 kW, and the maximum current it can withdraw is 28.3 amperes. The power wire cross-section area is 2.5 mm2. It doesn’t offer a holding brake and the mounting style is flange and foot mounting.