Product Description
The MAD100B-0200-SL-S0-KG0-05-N1 asynchronous housing motor introduced by Bosch Rexroth can be installed in horizontal and vertical orientations. This motor features a maximum allowed radial vibration load of 30 m/s^2 between 10 Hz and 20,000 Hz frequency. The product features vibrations in the form of sinusoidal oscillations in stationary use. This device portrays reduced output when its ambient operating conditions are exceeded. The unit can be operated at up to a maximum temperature of 55 degrees C. It portrays a temperature change rate of 0.5 degrees C/min.
This motor can be operated continuously within Class 3K4 limit ranges. The product can be operated in heavily soiled environments because of the fan cowl. This device portrays an optimized construction. The unit must not be subject to repeated high-voltage inspection tests. Its radial shaft sealing ring is made of PTFE material. This motor can be repainted only after checking the resistance and adhesiveness of the new paint. The product is cooled by a fan that cleans the air from the surroundings. This device has no holding brake to support its operation. The unit allows the fitting of pressure sleeves or clamping sets on its output shaft. Its output shaft is associated with clockwise rotation.
This motor has an IP 40 protection rating for the output shaft with vertical mounting. The product housing is not resistant to concentrated acids and lyes. This device related fan should not be operated if the surrounding air has abrasive particles. The unit delivers maintenance-free operation if it is used as intended. Its connectors should not be connected or disconnected under load. This asynchronous housing motor must be connected with cables supplied by the manufacturer.
Wake Industrial Warranty
