Product Description
MAD100B-0150-SA-S2-BG0-05-A1 is a Bosch Rexroth MAD series asynchronous motor. Asynchronous motors operate at a slightly slower speed than the synchronous speed determined by the frequency of the AC power supply. The difference between the synchronous speed and the actual speed of the motor is known as "slip." The amount of slip varies depending on the load on the motor and the design of the motor. Asynchronous motors are designed to be self-starting, meaning they can start up on their own without the need for an external starting mechanism. This is because the stator windings create a rotating magnetic field that induces a current in the rotor, which in turn creates a second magnetic field that interacts with the stator field and causes the rotor to turn. This process is known as induction and is the basis of the operation of asynchronous motors.
As per the type code, the frame size for the MAD100B-0150-SA-S2-BG0-05-A1 motor is 100 and its frame length is B. The motor has an IP65 rated housing that is designed for 0 to 40 degrees Celsius ambient temperature. Several features are available on the motor including a singleturn encoder with EnDat 2.1 interface, axial cooling fan, plain shaft with sealing ring and power connector on side B of the housing.
The motor delivers 31 Nm continuous torque at standstill and 13 Amps continuous current at standstill. Thermal time constant for the MAD100B-0150-SA-S2-BG0-05-A1 motor is 20 minutes. The cycle duration is 10 minutes. Bosch recommends power wire with 1.5 mm2 cross section. Shipping weight of the servo motor is approximately 43 kilograms. The sound pressure level during operation is 70 dB. Insulation class of the motor is 155.
Wake Industrial Warranty
