Product Description
The MAD100B-0150-SA-S2-AH1-35-N1 asynchronous housing motor provided by Bosch Rexroth has no shaft sealing ring. This motor features a holding brake with a holding torque of 24 Nm. The product comes with a standard deep-groove ball bearing. This device is balanced dynamically. The unit portrays a vibration speed of 0.71 mm/s. Its fan deploys a blowing action for the cooling.
This motor does not offer assurance of the safety of the operating personnel with its holding brake. The product must depict a power supply disconnection when maintenance work is undertaken on it. This device can be transported and/or stored only in the horizontal position. The unit must be operated in adherence to the technical data specified on its rating plate. Its holding brake is controlled by the drive controller. This motor features a weakening of the permanent magnets because of excessively high temperatures and over-voltages. The product-related vertical axis must be secured against dropping after turning off by ensuring sufficient weight compensation. This device features a shut-off temperature of 120 degrees C. The unit-associated temperature measurement sensors have a resistance of 1000 Ohms at 100 degrees C. It uses only one temperature sensor at a time for protection against overload.
This motor must be used without any structural changes. The product can be operated only through an externally connected cooling system. This device must be installed such that there is an adequate distance between the machine and the fan grille. The unit housing is partially resistant to organic solvents. Its encoder has a Hiperface interface. This asynchronous housing motor has no support for vertical installation.
Wake Industrial Warranty
