Product Description

Bosch Rexroth produces the MAD100B-0150-SA-S2-AH0-35-A1 servo motor. The sound pressure level of this servo motor is 70 dB(A), with a possible fluctuation of +/- 3 dB(A). This shows the noise level the motor produces while it is operating, as measured one meter away. dB(A) values below 0 indicate quieter operation. The motor weighs 43.0 kg as well, which should be taken into account for installation and system integration. The thickness of the electrical conductors powering the motor is shown by the power wire cross-section of the motor, which measures 2.5 mm^2. This number is essential for choosing the right cables and guaranteeing effective and secure power transmission.

Moreover, when the motor is powered by an alternating current (AC) power source, its three pole pairs have a direct impact on its synchronous speed. When sizing a motor for a particular application, the rated torque of 30.0 Nm is important since it indicates the continuous torque the motor can give at its specified speed without overheating. With its rated power (PN) of 4.71 kW, the MAD100B-0150 servo motor is intended to supply power. This is the motor's continuous power output at its rated speed (nN) of 1500 min^-1 under typical working circumstances. This power output is achieved by the motor drawing 12.9 A of its rated current (IN).

For this motor, the key speed (n1) is also 1500 min^-1. This indicates that the motor can run at this speed continuously with its rated power and torque. The torque and output of the motor may begin to decline beyond the crucial speed. Nonetheless, when using bearing A, the motor may attain a maximum speed (nmax) of 9000 min^-1. The torque and output of the motor will be reduced at this maximum speed in comparison to the rated speed, but this is the fastest speed it can safely attain. There is a one-year warranty on this module.