Product Description
MAD100B-0150-SA-M2-KQ0-35-N1 is a 1500 RPM servo motor. It is manufactured by Bosch Rexroth. It is known as a servo motor because it supports feedback. A multiturn absolute encoder is installed on the unit. This is a rotary encoder that provides the position of a shaft in terms of angle and also tracks the number of rotations. The benefit of feedback is accurate motor position and speed control. A controller connected to the motor uses feedback to modulate its output and minimize or eliminate the difference between the desired and actual motor parameter values. This is an example of a closed loop control system that is used for applications with stringent accuracy requirements. MAD motors have IP65 compliant housings. These housings provide strong ingress protection and enable MAD motor use in adverse operating conditions.
MAD motors are surface cooled motors with 0 to 40 degrees Celsius ambient temperature requirements. MAD100B-0150-SA-M2-KQ0-35-N1 is a motor with standard bearings that can sustain 9000 RPM maximum speed. The main shaft includes a key but is without a shaft seal. Holding brakes are available as an option. However, the motor is not equipped with a holding brake. The motor supports flexible mounting options with foot and flange mounting. Rated torque of the MAD motor is 30 Nm. The motor can deliver 68 Nm peak torque. Rated power of the motor is 4.71 kilowatts and it can deliver 9.66 kilowatts peak power. Rated current of the MAD100B-0150-SA-M2-KQ0-35-N1 motor is 12.9 Amps and it can deliver 23.5 Amps peak output current. The motor mass is 43 kilograms. Insulation class of the MAD series motor is 155. Number of pole pairs on the unit are three.
Wake Industrial Warranty
