Product Description
Bosch Rexroth produces the servo motor MAD100B-0050-SA-S2-BP0-35-N1. The mass of this servo motor is 43.0 kg. This weight is for the motor in its stock configuration, without the optional holding brake. Another important feature of the motor's design that affects its torque and speed characteristics is its three pole pairs. This servo motor has a thermal time constant of 20.0 minutes. This is the amount of time while running at a rated torque load, it takes for the motor's temperature to climb by 63% of its ultimate temperature rise. The motor can operate continuously at a standstill with a torque (Mn1) of 34.0 Nm and a current (In1) of 5.3 A.
The servo motor MAD100B-0050 is rated for 500 revolutions per minute (1/min) and is intended for continuous operation. Its rated torque, or the rotating force it can constantly apply, is 34.0 Newton meters (Nm), throughout its continuous operation. The torque and rated speed together provide a rated power output of 1.80 kW, which indicates the motor's continuous work capacity. To provide this level of power and torque, the motor requires 5.3 amperes (A) of rated current.
The kind of bearing that is utilized determines the motor's maximum speed. A motor with a bearing type of A, H, or N may safely run at a maximum speed of 3,000 revolutions per minute. But, it's essential to refrain from going above this limit since it can result in damage or technical problems. The highest torque that the MAD100B-0050 servo motor can produce is 75.1 Nm. Under ideal working circumstances, the motor can rotate with a maximum force of this magnitude. It is essential to remember that this maximum torque is dependent on the particular drive controller in the system and can only be achieved momentarily. The MAD100B-0050 motor can provide 3.69 kW of power at its maximum. We provide a guarantee for a year.
Wake Industrial Warranty
