MAD100B-0050-SA-S2-AH5-05-N1

Product Description

The MAD100B-0050-SA-S2-AH5-05-N1 is a MAD series AC servo motor manufactured by Bosch Rexroth. This motor has a rated power of 1.8 KW motor and a rated current of 5.3 amperes. The motor can provide a continuous torque of 34 Nm at a continuous speed of 500 rpm. The motor has a torque constant of 7.66 Nm/A at the ambient temperature of 20 °C. The motor has 3 pole pairs and for the main power, and it needs a minimum cross-section wire of 2.5 mm². The rotor of the motor can provide a moment of inertia of 0.019 kgm². The motor has a thermal time constant of 30 min and can be operated at the ambient temperature of 0-40 °C.

The motor has an electrically clamped holding brake which has a torque of 30 Nm. The rated DC power supply of the motor is 24 volts and the current required to operate it is 0.9 amperes. The brake exhibits a moment of inertia of 0.00056 kgm² and the maximum permissible braking energy is 20,000 Ws. It takes 42ms for the brake to engage and 50ms for the brake to disengage. The motor also has an axial blower for cooling, and it uses a power of up to 100 VA at 0.12 amperes with an average air flow rate of 230 m³/h.

The motor has an absolute value single-turn encoder. It provides 2408 increments on a single revolution. The motor has a mass of 39kg and the holding brake has a mass of 2Kg. The motor has a plain shaft without any sealing ring. Its mounting size is 100 and it can be mounted through the flange.