Product Description
This Alternate Current servo motor, Catalog ID MAC160B-0-GD-3-C/250-L-0/S001, makes up a component of the Bosch MAC series. The rated nominal speed for this servo is 2000 min-1. The torque at a halt is 4.4 (6.6) Nm. The current at a halt is 5.0 (7.9). The motor's moment of rated inertia is 9.9 x 10-4. The torque stays constant at 0.880 when the outside temperature is 20 °C. The winding resistance is rated for 20 degrees Celsius and has a coefficient of 2.7. The winding inductance rating for this motor equals 22. The pulse power reaches a maximum peak of 25 ipeak.
The spectrum of ambient temperature that is deemed acceptable is from 0 to 45 degrees in Celsius. For proper transportation and storage, it is essential to maintain a temperature range of -20 to +80 degrees Celsius. The maximum installation elevation is rated to be 1000 meters above sea level. IP 65 denotes the level of insulation and protection. The AC servo motor has been fitted with a housing coat "F" to provide additional protection in opposition to external particles. The voltage constant of the tachogenerator ranges from 0.0143 1.5/1000 to 0.0286 3/1000 V/min-1 Vs/rad.
The wire's cross section measures 8.8 ± 0.3 mm. The minimum bending radius for fixed routing is 40 mm. By preserving the minimum bending radius for flexible routing, the service life may be increased up to 1,000,000 bend loads. The weight is determined at 0.102 kg/m. The acceptable range for operating and storing is -30 °C to +80 °C. Thanks to its reliable chemical properties, it provides protection from mineral oils as well as greases, is resistant to hydrolysis, and is free of silicone and halogens. The maximum cable length accepted is 100 meters.
Wake Industrial Warranty
