MAC160B-0-GD-2-F/250-R-1

Product Description

The MAC160B-0-GD-2-F/250-R-1 acts as a servo motor from the MAC lineup that works on Alternate Current. It was created and built by the Bosch Rexroth Group. The normal motor speed for this AC servo rotor is 2000 m/s. The torque at standstill remains 4.4 (6.6) Nm. The steady current at idle-state is 5.0 (7.9). The rotor moment of inertia is 9.9 x 10-4. The motor speed which can be used is established by the drive in use. This servo motor has a significant overtemperature in the motor enclosure.

The drive has the ability to restrict constant torque. It is necessary to order the motor power connector (INS 108) independently. When enforcing screws in the threads of the central spigot, users must adhere to the specified maximum instructions. This motor secures A torque of 2 Nm. When placing an order, the direction of the output for the electrical power connector must be chosen. Here are some possible output orientation: left, right, side A, as well as side B.

The optimal temperature range for the nearest area is 0 to +45 degrees Celsius. The recommended temperature range for both transport and storage is between -20 and +80 degrees Celsius. The maximum allowed setup elevation is 1000 meters above sea level. Previous experiences in the industry indicate the crucial role of installation design in ensuring the smooth transmission of encoder signals without any interference. Ensure that the cables are correctly routed, taking care to separate them from the load voltage lines as well as mains control lines by using shielding. Ensure that the encoder cables are either kept at least 100 mm away from the motor cables or detached by a metallic partition to avoid interference.