MAC115D-0-ES-2-C/130-A-0

Product Description

The MAC115D-0-ES-2-C/130-A-0 AC servomotor delivered by Bosch Rexroth can be mounted in any orientation. This motor encompasses a plain output shaft. The product must neither be tipped nor dropped during transport and storage. This device has no blocking brake. The unit features a tacho voltage that matches its nominal speed. Its longitudinal axis depicts a maximum excursion amplitude of 0.3 mm with sinusoidal oscillations. This motor can be mounted vertically with the output shaft facing upwards or downwards.The product has low inertia because of the choice of materials for the permanent magnets in its rotor. This device can be operated even under poor environmental conditions. The unit features a completely enclosed housing. Its thermo switches monitor its temperature and safeguard it against overload. This motor has a high overload capacity. The product depicts heat dissipation from the windings of the stator to the external walls of its housing.

This device supports the direct mounting of belt pulleys and pinions on its output shaft. The unit has a high power-to-weight ratio because of its compact construction. It is affected on Side A by thermal deformations. This motor supports a non-positive shaft hub connection. The product-related operating curves depict the intermittent torque with the S6 operating mode. This device must be stored in a cool and dry place. The unit has a cylindrical shaft end with a DS M8-19 centering hole for its output shaft. Its peak torque can be used over a wide speed range. This AC servomotor uses an INS 702 power connector and an INS 302 or INS 102 straight feedback connector for its connections.