Product Description
The MAC115D-0-DS-4-C/130-A-1/WA605XX/S001 AC servomotor introduced by Bosch Rexroth is compatible only with the manufacturer's drive controller. This motor is associated with a standard pilot diameter. The product encompasses a laminated core with permanent magnets. This device uses its tacho feedback for speed evaluation per tacho-generator. The unit is characterized by high output data. Its holding brake holds the output shaft in standstill mode to achieve a safe standstill of the axis when the power is turned off. This motor is meant to be operated within the ambient conditions specified by the manufacturer.The product is protected by its housing and covers, which are constructed and designed according to DIN 40 050 specifications. This device has an IP 65 protection class for its output shaft. The unit should not be used without the drive controller. It can be installed horizontally or vertically. This motor can be operated under weatherproofed conditions in a stationary manner as per IEC 721-3-3 or EN 60721-3-3 specifications.
The product is not suitable for applications like punching and pressing. This device encompasses an output shaft with a keyway. The unit encounters a load on its output shaft when it is affected by radial and axial forces. It is subject to thermal stress when drive pinions with helical teeth are fitted axially to the machine with bevel gears.This motor deploys the closed-circuit principle for the working of its holding brake. The product has a brushless design. This device has no special windings design. The unit has derated output when it is operated outside the operating conditions specified by the manufacturer. It features complete protection against the penetration of dust. This AC servomotor has no second shaft end.