Product Description
The MAC115B-1-GS-4-C/130-B-1/WA608XX Bosch Rexroth AC servomotor is equipped with a blocking brake to support the operation. This product features shielding on its encoder cables. The device encompasses bearings with grease that lasts throughout their lifetime. The unit has a compact construction resulting in a high power-to-weight ratio. Its blocking brake holds the output shaft in standstill mode and secures the axis in position when the power is turned off. This motor supports the direct connection of its power, encoder, and tacho feedback cables using the connectors on their flanged sockets.
The product features protection against the penetration of water and extrinsic objects. This device is protected against overload by means of the thermo switches with a series connection. The unit can be put into operation in stationary mode under weatherproofed conditions as per IEC 721-3-3 specifications. It can be mounted as per Design B14 by using a mounting flange with windings. This motor allows direct mounting of belt pulleys and pinions on its output shaft. The product has floating bearings that absorb the radial forces on Side A. This device must be connected with the manufacturer's cables. The unit should be used in its original state without any structural changes. Its blocking brake works on the closed-circuit principle.
This motor features Type L and Type II total shock-response spectrums for longitudinal and latitudinal axes respectively. The product has a customized pilot diameter for the mounting flange. This device does not offer assurance of personnel safety with the blocking brake. The unit housing is resistant to diluted lyes and acids as well as yellowing, weathering, and chalky build-ups. Its blocking brake is controlled by a hardware switch or a PLC. This AC servomotor can be installed vertically with the output shaft facing upward or downward.
Wake Industrial Warranty
