Product Description
The MAC115B-0-GS-4-C/130-A-1/WA605XX/S001 AC servomotor supplied by Bosch Rexroth cannot be used without a drive controller. This motor is not recommended for operation outside the ambient operating conditions. The product has a maximum speed based on the DC bus voltage generated by the supply source at the drive. This device features a maximum duty cycle time of 15 minutes. The unit supports S1 and S6 operating modes. Its power and feedback connectors must be bought separately. This motor must adhere to certain guidelines when mounting or commissioning to avoid damage to the machine.
The product is meant to be replaced by only a motor of the same type. This device has two M8 tapped holes on its housing. The unit should be picked up using a chain tackle or a crane and belts. The unit must be in a dry state during its storage and transportation. It can be installed horizontally or vertically. This motor is not meant to be subject to heavy loads as this can cause its bearings to get damaged. The product encompasses a rating plate attached to its housing. The device-related connections should not be disconnected when it is under load. The unit has an operating and storage temperature of -30 degrees C to 80 degrees C for its cables. Its encoder and power cables must be routed at a distance of at least 100 mm from each other.
This motor has a keyway output shaft as per DIN 6885-1 specifications. The product is well-suited for installation in textile machines and packaging machinery. This device comprises permanent magnets in its rotor. The unit has two sets of windings. Its output shaft is attached to the rotor. This AC servomotor depends on an encoder for feedback evaluation.
Wake Industrial Warranty
