MAC114C-0-MD-4-C/180-A-0/WI518LV/S003

Product Description

With a torque rating of 35 Nm, the MAC114C-0-MD-4-C/180-A-0/WI518LV/S003 from Rexroth is perfect for low torque applications such as drilling that relies on high speeds, which this servo motor can provide, with a speed rating of up to 6000 rotations per minute. This servo motor requires an input voltage of 240 to 480 volts AC with a 3-phase configuration and a frequency of 50 Hz to 60 Hz.

This AC servo motor can offer a maximum speed of up to 9000 rotations per minute when using the high-speed reinforced bearings, which the manufacturer recommends be lubricated after every 20000 cycles of use or replaced once every 30000 cycles of use. To help reduce vibration, the MAC114C-0-MD-4-C/180-A-0/WI518LV/S003 comes with an R-graded vibration severity rating. This R rating allows the motor structure to have a reinforced design, reducing vibrations in the motor enclosure and enabling it to perform optimally over long periods. With an IP 65 protection rating, this motor is protected against dust and low-level water splashes, ensuring its durability in harsh industrial environments.

The 45 Nm blocking brake on this motor helps prevent the shaft from slipping from its intended position and keeps it locked even during a power loss. The brake requires 24 volts DC to operate, drawing 0.96 amperes of current. It has an engagement delay of 30 ms and disengagement delay of 80 ms, making the brake quick to respond to control signals generated by the motor control module.