Product Description
The MAC114C-0-MD-3-C/130-B-1/S005 Bosch Rexroth AC servomotor has two thermo switches with a series electrical connection. This motor encompasses a standard blocking brake. The device incorporates ball bearings with a lifespan of 30,000 operating hours as per ISO 281 specifications. This device is equipped with a second shaft end. The unit and its components must not be cleaned using harsh cleaning agents. Its operating curves highlight the torque-limiting data and speed-limiting data. This motor has two tapped holes on its housing to attach lifting screws.The product should be transported and/or stored only in the horizontal orientation. This device has a nameplate attached to its housing. The unit must be connected only in the dry and de-energized state. It should be allowed to cool down after use before any work is done on it. This motor-related encoder and power cables should be routed at a distance of at least 100 mm from each other.
The product has a standard pilot diameter for the mounting flange. This device features a maximum tightening torque of 1 Nm for screws in the threads of the center spigot. The unit is one of the several such motors in the MAC series by the manufacturer. Its tacho feedback cable has a maximum length of 75 m.This motor supports power cables with either metric diameters or inch diameters. The product uses special materials to design the permanent magnets in its rotor. This device is protected against overload by the integrated thermo switches. The unit encompasses the second shaft end on Side B. Its second shaft end can be used to mount an encoder. This AC servomotor is characterized by maintenance-free operation.
Wake Industrial Warranty
