Product Description
The MAC114C-0-MD-2-C/180-A-1/S009 AC servomotor from Bosch Rexroth operates as a rapid-response drive when it is used with a selected drive controller. This motor is excited by permanent magnets. The product comes with its output shaft on Side A. This device is always associated with tacho feedback. The unit has a high degree of reliability. It is delivered with a blocking brake. This motor is meant to be installed only in industrial machinery. The product has no special windings design. This device encompasses a plain and smooth output shaft. The unit is equipped with flange sockets with connectors for connecting its cables. Its holding brake holds the output shaft in place in standstill mode. This motor depicts derated output when it is operated outside the ambient conditions.
The product is completely protected against the penetration of dust. This device comes with a rating plate fitted on its housing. The unit should not be lifted by holding onto the output shaft. Its connectors must be bought as separate subitems.This motor is not recommended to be cleaned frequently using a steam cleaner as this can cause its coat to peel off. The product can be associated with a mounting flange featuring either throughholes or windings. This device achieves a backlash-free transmission of torque. The unit must undergo a grind-in process if the storage period has exceeded two years. It is not possible to change the output direction of the power connector. This AC servomotor supports straight- or angle-type connectors for its feedback connection.
Wake Industrial Warranty
