Product Description
The MAC114B-0-SD-4-C/130-B-0/WI521LV/S005 AC servomotor produced by Bosch Rexroth has a plain output shaft with a shaft sealing ring. This motor portrays a standard mounting style for its incremental encoder. The product should be grounded to the drive amplifier. This device must be wired according to the terminal diagram of the machine manufacturer. The unit encompasses spigot nuts on the connectors to screw the cables tightly in place. Its bearings are prone to damage if there is a high load on the output shaft. This motor is meant to be replaced only after checking and noting the reference point settings of its encoder.
The product is easily identifiable by its type designation mentioned on the rating plate. This device is ideal for use in handling equipment, packaging machinery, and transfer facilities. The unit has low inertia because of the choice of special materials for its permanent magnets. Its power and encoder cables must be routed at a distance of at least 100 mm from each other. This motor uses the mounted incremental encoder to evaluate its position. The product has a completely closed housing that allows it to be used even under poor environmental conditions. This device is fitted with thermo switches in its stator housing and windings. The unit has a favorable torque-to-inertia ratio resulting in high dynamic performance. Its tacho feedback has a high resolution.
This motor has a high overload capacity. The product depicts heat dissipation from the windings in its stator to the external walls of its housing. This device has a high power-to-weight ratio because of its compact construction. The unit comes with a floating bearing on side A. It deploys a simple mounting process. This AC servomotor is affected by thermal deformations on the side with the output shaft.
Wake Industrial Warranty
