Product Description
The MAC114B-0-SD-4-C/130-A-1/WI634LX/S007 Bosch Rexroth AC servomotor cannot be used with drive controllers from other manufacturers. This motor must be connected using only the manufacturer's cables. The product incorporates an incremental encoder with standard mounting for feedback. This device has no second shaft end. The unit depends on a hardware switch or a PLC for controlling its blocking brake. It is not possible to change the output direction of the power connector. This motor features the connection of its incremental encoder in its power connection.
The product uses cables with either metric diameters or inch diameters for its power connection. This device has a 12-pin flanged socket for the encoder and feedback connections. The unit can be used only in machines with low shock loads. Its encoder can be used in harsh environmental conditions. This motor relies on squarewave signals with a supply voltage of 10 V to 16 V for the functioning of its encoder. The product supports changing the reference point of its encoder mechanically by an electrician. This device must be cooled down after operation before any work is done on it. The unit-related torque-speed characteristics help in determining the maximum usable speed for an application with known torque requirements. It can be associated with a regulated or unregulated power supply.
This motor has a reduced lifespan for its bearings when a high radial load is encountered. The product portrays a tolerance class of N as per DIN 42955 specifications. This device is equipped with plastic protective sleeves on its connectors and housing. The unit must be free of load when it is being transported or stored. Its speed varies according to the drive controller being used. This AC servomotor is protected against overload by its thermo switches.
Wake Industrial Warranty
