Product Description
The Bosch Rexroth MAC114B-0-SD-4-C/130-A-1/WI516LV/S007 AC servomotor is always equipped with a tacho feedback that is specially designed for this series. This motor encompasses ball bearings with grease lubrication that lasts during their entire lifetime. The product comes with a keyway shaft and a standard blocking brake. This device must not be operated without the drive controller. The unit has a standard windings design. It is designed exclusively for industrial use. This motor supports S1 and S6 operating modes.
The product portrays a maximum duty cycle time of 15 minutes. This device has a voltage rating of 24 VDC for its blocking brake. The unit must be free of fluid accumulation around its output shaft when it is mounted vertically with the shaft facing upwards. Its power and tacho feedback connections have an IP 65 protection rating. This motor portrays a frequency range of 2 Hz to 9 Hz with sinusoidal oscillations for its longitudinal and lateral axes. The product can be coated with an additional layer of paint of not more than 40 um thickness. This device uses a mounting flange with a pilot diameter of 130 mm. The unit must be lifted using a chain tackle or crane belt. It is possible to screw in lifting screws into the tapped holes on the housing.
This motor comprises spigot nuts on its connectors. The product must be grounded properly before it is put into use. This device is meant to be transported and stored only in the horizontal orientation. The unit must not be subject to impacts on the output shaft. Its rating plate is attached to its housing. This AC servomotor uses separate connectors for the power, feedback, and encoder connections.
Wake Industrial Warranty
