MAC112D-2-FD-3-C/130-A-0/S005

Product Description

The MAC112D-2-FD-3-C/130-A-0/S005 is a rapid-response servo motor designed by Rexroth Indramat to operate in conjunction with TDM, KDS and the DSD drive controller. This industrial motor is a very flexible device that is especially well suited for operation in machine tools, food processing machines, printing presses, robotic machines, transfer facilities and lots more. The housing of this industrial motor is designed to provide protection according to the IP65 protection class; this high degree of protection allows the motor to maintain optimum operational efficiency in harsh industrial conditions considered unfavourable for convectional industrial machines. The MAC112D-2-FD-3-C/130-A-0/S005 industrial motor is also a permanent magnet-excited device with electronic commutation. The permanent magnets present in the motor allow it to maintain low inertia during operation.

The MAC112D-2-FD-3-C/130-A-0/S005 industrial motor features a motor feedback system comprising one tacho feedback and a second shaft end. The motor feedback system converts the physical operation of the industrial motor into digital signals that can be used by the drive controller to monitor the operational status of the industrial motor in real-time. The MAC112D-2-FD-3-C/130-A-0/S005 industrial motor features a permanent axial air blower designed to keep the motor's operating temperature within a permissible range via surface cooling.

The MAC112D-2-FD-3-C/130-A-0/S005 industrial motor requires a continuous input current of about 63 amperes when it is at a standstill; at this current, the motor generates a continuous torque of 35-newton meters and operates at a nominal speed of about 3000 revolutions per minute. The connection between the industrial servo motor and the drive controller occurs through a power cable and the motor feedback cable; these two cables enter the motor's housing through special connectors designed to preserve the IP65 protection class of the motor.