Product Description

AC servomotors, drive controllers, and replacement components manufactured by Bosch Rexroth are of superior quality and value. The MAC112D-1-FD-4-C/130-B-1/DI524LV/S014 model should be used between 0 and + 45 degrees Celsius and 0 and 1000 meters above sea level. Minimum motor winding resistance and inductance are 0.110 ohms and 1.80 mH, respectively. The MAC112D AC servo motor must be stored between - 20 and + 80 degrees Celsius and has a rotating speed of 2000 revolutions per minute. The model's IP65 protection certification and F insulation class make it suitable for a variety of applications in tough environments.

The model is easily compatible with the required machine. Due to the fact that the design of the bearing assembly facilitates the application of considerable radial loads, pinions and belt pulleys may be installed directly on the shaft. During operation, the MAC112D AC servo motor housing transfers heat through axial surface cooling. The motor features tacho feedback, and an incremental encoder, and has a thermal time constant of 90 minutes.

The model MAC112D-1-FD-4-C/130-B-1/DI524LV/S014 weighs 59 kilograms and should only be installed and operated by a trained professional. The model has a centering diameter of 130 mm and a power hookup on the housing's B side. The motor is covered with a 40-micron-thick black paint coating to prevent corrosion. The servo motor generates a significant amount of torque, 38 Nm while consuming a constant current of 56 A. The motor (MAC112D-1-FD-4-C/130-B-1/DI524LV/S014) has a standard holding brake with 45 Nm of holding torque and 1.1 kilos of mass.