Product Description
The MAC112D-0-ED-4-C/130-A-1/WI534LX Bosch Rexroth AC servomotor operates with the manufacturer’s TDM drive controller. This motor portrays a very hot surface during and immediately after its operation. The product comprises two sets of windings. This device comprises an incremental encoder connection. The unit has continuous torque of 35Nm when it is in a standstill position. Its shaft is located on the A-side. This motor depicts IP 65 degree of protection for its power connection. The product housing comprises a black prime coat. This device supports six mounting positions with Design B5 and Design B14 mounting options.
This motor depicts a radial shaft load based on the point of application of force and the average speed. The unit is integrated with a plain and smooth output shaft designed to support its operation. It uses either straight-style or angle-style feedback connectors. This product can trigger untoward consequences if it is not used as intended. The device must be run at approximately 100rpm speed as part of the grind-in process. This unit comprises thermo switches built into its stator housing and windings. Its incremental encoder is specifically designed for the manufacturer’s motor. The servomotor is available with a year’s Wake Industrial warranty.
This product requires no setting of the reference point of its encoder to a defined angular position. The device handling must be undertaken by only qualified personnel. This unit’s related operating curves highlight its speed-limiting data and torque-limiting data. Its encoder functions with either sinusoidal signals or square-wave pulses. The motor attains its maximum speed based on the DC bus voltage generated by the supply source present at the drive. This product features 15 minutes maximum duty cycle time. The device transportation should be carried out by taking care not to trip or drop it. This MAC112D-0-ED-4-C/130-A-1/WI534LX servomotor is delivered to any global destination.
Wake Industrial Warranty
