Product Description
The MAC112D-0-ED-4-C/130-A-0/WI534LX AC servomotor offered by Bosch Rexroth cannot operate without a drive controller connection. This motor feedback is made up of the tacho feedback and mounted encoder-associated feedback. The product has two sets of windings. This device-related tacho feedback helps in speed evaluation per tacho generator as well as rotor position recognition. The unit uses the mounted encoder for evaluating its position. Its mounting is possible horizontally as well as vertically. This motor is not designed to withstand extreme loads. The product is fitted with an encoder with standard mounting. This device has decreased load capacity at higher than ambient operating temperature or installation elevation.
The motor features complete protection against the entry of extrinsic objects. This unit can function under weatherproofed conditions in a stationary manner in accordance with IEC 721-3-3 specifications. Its housing portrays a black prime coat painting. The product makes use of a mounting flange with throughholes to mount it as per Design B5. This device allows the coupling of pinions using pressure sleeves, clamping sets or similar clamping components on its output shaft. The unit incorporates a fixed direction for the output direction of its power connector. This MAC112D-0-ED-4-C/130-A-0/WI534LX servomotor portrays backup support for one year.
The motor power connection includes the connecting cable for its thermos switches and the power cable. This product comprises power cables with either metric or inch diameters for its power connectors. The device is supposed to be connected only with cables provided by the manufacturer. The unit encompasses spigot nuts on its power as well as feedback connectors. It is possible for screwing lifting screws designed in compliance with DIN 580 specifications into the two tapped holes. This motor has to be in a dry state during the transportation and handling stages. The servomotor delivery can be done to any location across the world.