Product Description

MAC112D-0-ED-4-C/130-A-0/WI524L/S05 is a Bosch Rexroth servo motor from the MAC product line. It is designed for industrial applications such as textiles, robotics, and printing machines. The motor support convection cooling and delivers 35 Nm torque and 63 Amps current at standstill. The main motor shaft has a keyway. The output shaft with keyway complies with requirements specified in DIN 688-1. This type of shaft achieves a form-fitting torque transmission. This type of shaft-hub connection is suitable for lower load demands. A multi-axial stress state occurs at the shaft-hub connection as a result of torsion, bending, radial and axial loads. It is possible, during frequency reverse operations, for the bottom of the key to turn out and reduce the concentricity quality. Continuously increasing deformations can lead to fractures. MAC motor support tacho feedback.

In addition to tacho feedback, the MAC112D-0-ED-4-C/130-A-0/WI524L/S05 motor is equipped with an optional mounted encoder. This arrangement corresponds to the tacho feedback with respect to the detection of velocity feedback value and rotor position. Mounted encoders in the following versions are available for position detection and evaluation: Standard mounted incremental encoders are for use with machines that experience lower shock loads. Incremental encoders with shock-damped mounting are for use in presses, stamping machines and similar machinery. The motor requires 0 to 45 degrees Celsius temperature for rated output. Its output derates if the ambient temperature is between 45 and 55 degrees. Bosch does not permit MAC motor use at temperatures above 55 degrees Celsius. With electronic commutation and bearings that life time lubricated, MAC motors provide maintenance-free operation. With IP65 rated housings, these motors can be deployed and operated in a wide range of conditions.