Product Description
The MAC112D-0-ED-4-C/130-A-0/WA608XX/S023 AC servomotor manufactured by Bosch Rexroth works in combination with the manufacturer’s drive controller. This motor comprises a maximum speed based on the DC bus voltage generated by the supply source at the drive. The product has a minimum duty cycle time of 15 minutes. This device comes with a nominal speed of 3,000min-1. This device comprises its output shaft on the side-A. The unit features permanent magnets embedded in its rotor. It is equipped with a mounted encoder that helps in position evaluation. This motor has a very hot housing during and soon after the operating period.
The product has dedicated flanged sockets on the housing for the direct connection of its power, encoder and tacho feedback cables. This device has reduced performance when the ideal operating conditions are exceeded. The unit is safeguarded against the penetration of dust. Its housing and covers are constructed and designed in adherence with DIN 40 050 specifications. This motor has a 2Hz to 9Hz frequency range with excursion amplitude for both its axes when there are sinusoidal oscillations. The product supports mounting as per Design B5 and Design B14. This device has a plain output shaft for non-positive shaft-hub connections. The servomotor comprises one-year backup support.
This motor is not recommended for applications that are extremely demanding in nature. The unit utilizes a mounting flange with a standard pilot diameter. It has no support for a surface cooling action. This product features protective covers made of plastic on the output shaft as well as the connector housing. The device transportation and storage must be performed only in the horizontal orientation. This unit is meant to be picked up using a crane and belts. It should be free of load at the shaft during the pickup process. The motor housing is equipped with two tapped holes for the pickup action. This servomotor dispatch is done worldwide.
Wake Industrial Warranty
