Product Description

MAC112D-0-ED-4-C/130-1-0/WI511LV is a Bosch Rexroth servo motor. It is designed for industrial applications that include textile, printing presses, robotics and transfer facilities. The motor has a flange, which is a rectangular plate, for mounting. Size of the flange is 193 millimeters. Mounting holes on the flange allow secure attachment to the machine. Diameter of each of the mounting holes is 14 millimeters. Weight of the servo motor is approximately 59 kilograms. Length of the motor housing is 535 millimeters. The MAC112D-0-ED-4-C/130-1-0/WI511LV motor has a plain shaft with 32 millimeters diameter. MAC motors have housings that comply with IP65 requirements. This rating implies complete protection against dust ingress and strong moisture ingress protection. As a result, MAC motors can be installed in a range of operating environments.

Bosch recommends 0 to 1000 meters site altitude and 0 to 45 degrees Celsius ambient temperature for operation with rated values. Derated operation is permitted at altitudes of up to 5000 meters and temperatures of up to 55 degrees. The MAC112D-0-ED-4-C/130-1-0/WI511LV motor has 3000 RPM speed rating. Its continuous output torque is 35 Nm and the continuous output current is 63 Amps. These values are valid when the motor uses convection cooling for heat dissipation. MAC motors support surface cooling as an optional feature. Surface cooling is reliant on optional cooling fans for increasing airflow across the motor housing. The motors receive power via a dedicated power cable. This cable connects to a power connection located on the motor housing. The motor sends feedback via a dedicated feedback cable. The feedback connector is also located on the motor housing. To prevent damage and injury, only trained personnel should work with MAC motors.