Product Description
The MAC112C-0-KD-4-C/180-A-1/WI534LX/S011 AC servomotor supports S1 and S6 operating modes. This motor has a breaking point for its maximum torque based on the DC bus voltage as its drive. The product and its components must not be cleaned using harsh cleaning agents. This device has a defined angular position setting for its incremental encoder. The unit has an output shaft with a keyway. Its Side B absorbs the radial forces.
This motor has an encoder that is extremely resistant to environmental conditions. The product is intended to be installed in machines with low shock loads. This device uses the encoder for position detection and evaluation of its rotor. The unit supports either crimping or soldering of its power cables with metric diameters to the power connector. Its thermo switches have a series-type electrical connection. This motor supports changing the output direction of the power connector by releasing the four fixing screws. The product needs its blocking brake to be kept closed when the grind-in action takes place. This device encounters a shift in the position of Side A by 0.6 mm with respect to the housing because of thermal deformation. The unit must not have liquid accumulation around the output shaft for an extended period with IM V3 and IM V19 mounting styles. It is mounted as per design IM B5 with the help of a mounting flange featuring throughholes.
This motor tends to experience peeling of its housing coat if it is cleaned often using a steam cleaner. The product associated torque-speed characteristics can be used to determine if the application is within the thermal limits specified for the motor. This device has a 24 VDC +/-10% voltage rating for the blocking brake. The unit features a standard tacho. Its blocking brake must be controlled using a hardware switch or a PLC. This AC servomotor may cause dangerous drive controller movements because of its faulty control.
Wake Industrial Warranty
