Product Description
The MAC112C-0-KD-4-C/180-A-1/WI534LX/S003 AC servomotor by Bosch Rexroth has a rating plate that contains the key technical details that are needed at the time of service. This motor must be handled only by people with the expertise to do so. The product has a cylindrical shaft end as per DIN 332 specifications for its output shaft. This device uses the blocking brake to hold the output shaft at a standstill when the power is turned off. The unit must be operated such that the permissible limits for the axial and radial forces are not exceeded. Its floating bearing on Side A absorbs the axial forces.
This motor is protected against the penetration of extrinsic objects. The product does not support shock-damped or shock-decoupled mounting. This device has a prime coat on its housing that is resistant to diluted acids and lyes. The unit can be installed vertically with the output shaft facing upwards or downwards. Its permissible axial force is calculated using a formula in terms of the permissible radial force. This motor has a customized centering diameter for the mounting flange. The product encounters a load on the output shaft when it is affected by radial and axial forces. This device tends to encounter wear down of its blocking brake after 20,000 motor revolutions. The unit must not be worked on when its surface is hot. Its wiring must be done according to the terminal diagram of the machine manufacturer.
This motor is affected by thermal deformations in length on its Side A. The product comes with the angle feedback connector directed to Side B by default. This device incorporates an incremental encoder that works with sinusoidal signals or square-wave pulses. The unit associated operating curves highlight its speed-limiting data and torque-limiting data.This AC servomotor has a maximum duty cycle time of 15 minutes. Wake Industrial offers a 1-year warranty on purchase of this motor.
Wake Industrial Warranty
