Product Description
The MAC112C-0-KD-4-C/130-B-1/WI534LX/S005 AC servomotor from Bosch Rexroth is used with the manufacturer's drive controller. This motor is always integrated with tacho feedback. The product can be operated as a rapid-response servo drive. This device must be installed only in industrial machinery. The unit encompasses permanent magnets in its rotor. Its output shaft is attached on Side A to the rotor.
This motor is delivered with a standard blocking brake. The product has no second shaft end. This device encounters axial and radial forces when it is put into operation. The unit can be directly connected with its power, encoder, and tacho feedback cables. It portrays reduced output when the ambient operating conditions are exceeded. This motor is associated with an IP 65 protection class. The product comes with an incremental encoder mounted for feedback. This device can be operated under weatherproofed conditions in a stationary manner as per IEC 721-3-3 specifications. The unit has a black prime coat on its housing. It can be mounted as per design IM B5 or design IM B14 by using an appropriate flange.
This motor does not have any special windings design. The product has two M8 tapped holes on its housing to insert lifting screws. This device is not meant to be operated for applications other than those intended by the manufacturer. The unit has a shaft sealing around its output shaft. Its axes depict a frequency range of 2 Hz to 9 Hz with sinusoidal oscillations. This AC servomotor is designed using environment-friendly materials.
Wake Industrial Warranty
