Product Description
The MAC112C-0-KD-4-C/130-A-0/DI522LV/S021 AC servomotor manufactured by Bosch Rexroth must be connected electrically only after it has been mechanically mounted. This motor should be handled only by skilled and trained personnel. The product comprises spigot nuts on its connectors that must be screwed tightly in place when the cables are connected. This device is meant to be used in its original state without any structural changes. The unit should be wired according to the terminal diagram of the machine manufacturer. Its connectors should be disconnected only in the de-energized state.
This motor is meant to be grounded to the drive amplifier before it is turned on. The product is likely to encounter damage to its bearings if there is an impact on the output shaft. The device comes with an incremental encoder that supports shock-damped mounting. The unit has a maximum duty cycle time of 15 minutes. Its operating curves represent its torque-limiting data and speed-limiting data. This motor features Class F insulation. The product has two tapped holes in its housing to insert the lifting screws. This device comes with protective covers that must be removed only just before assembly. The unit must neither be tipped nor dropped during its transport and storage. Its encoder works with sine-wave signals.
This motor portrays its type designation and key technical details on the rating plate. The product supports a storage and transportation temperature of -20 degrees C to 80 degrees C. This device associated connectors must be bought separately. The unit must not be worked on when its surface is hot. It should be ensured that the motor and encoder cables are routed at a distance of at least 100 mm from each other. This AC servomotor has a compact construction.
Wake Industrial Warranty
