Product Description
The MAC112C-0-KD-3-C/130-B-0/S021 AC servomotor offered by Bosch Rexroth uses a mounting flange with a standard pilot diameter. This motor has high output data. The product belongs to the MAC series of motors from the manufacturer. This device must not be picked up by holding onto the output shaft. The unit has a very hot housing during and immediately after its operation phase. Its housing features a black prime coat that is resistant to weathering and yellowing.
This motor has a plain output shaft. The product features an IP 65 degree of protection. This device is affected by thermal deformations in length on Side A. The unit comes with thermo switches integrated into its windings. Its output shaft supports non-positive shaft-hub connections. This motor has no special windings design. The product features a standard tacho. This device is always associated with tacho feedback. The unit has a frequency range of 2 Hz to 9 Hz with sinusoidal oscillations for both axes. It features no generally applicable solution for shock-damped mounting.
This motor is mounted as per Design B5 by using a mounting flange with throughholes. The product can be installed vertically with the output shaft facing upward or downward. This device encounters a load on the output shaft as soon as it is affected by axial or radial forces. The unit should be run at approximately 100 rpm speed during the grind-in process. It comes with a 12-pin socket on its housing for the encoder and feedback connections. This AC servomotor uses a superordinate PLC to detect the opening of its thermo switches.
Wake Industrial Warranty
