Product Description

The Bosch Rexroth MAC112C-0-ED-4-C/130-A-2/WI520LV/S018 is a reliable AC servomotor that can be mounted to the machine only by trained personnel. The device should be properly grounded to the drive amplifier used. When wiring the unit, the terminal diagrams provided in the manual should be followed. The product must not be picked up at the blower because it will tear the blower off of the housing. The motor has a rating plate with technical details. If the user orders a second rating plate, it is placed on the original one using double-sided tape. The cooling process is done by natural convection. The motor has a power connection, a tacho feedback connection, and an incremental encoder connection. If the device is stored for more than two years, the user should grind it in before using it. The output shaft of the MAC motor comes with a shaft sealing. The unit is well protected by its covers and housing, which, in build and design, stick to the guidelines of DIN 40 050. The product incorporates a heavy-duty holding brake. It clamps the output shaft of the motor in a standstill mode. The unit has permanent magnets. Commutation is performed electronically. The device sports a brushless design. It incorporates lifetime lubricated bearings. The MAC servomotor operates like a servo drive with a rapid response when it functions with a suitable drive controller. The motor can be mounted in any orientation. The product has a high degree of reliability. It has a protection category of IP 65. The power connector of the device is directed to side A and cannot be changed. The motor can be directly connected to its cables using the connectors on the corresponding flanged sockets.