Product Description
With MAC112C-0-ED-4-C/130-A-1/WA610XX/S005, users can run their industrial, high-powered gearbox systems and machinery that require high torque alongside high speed. This particular model of the motor has a speed rating of 3000 rotations per minute with a standstill torque rating of 24 Nm. To prevent the shaft of the motor from rotating aimlessly, the MAC112C-0-ED-4-C/130-A-1/WA610XX/S005 servo motor comes with an absolute encoder that is capable enough to control the shaft positioning with the help of step count. This motor encoder has a high resolution of 2048 steps which further helps with the precision of the shaft position.
This motor can generate a lot of heat depending on the type of application and the duration it is being used for, and to counter this problem, the MAC112C-0-ED-4-C/130-A-1/WA610XX/S005 servo motor utilizes its aluminum body using a natural convection cooling method. The motor should always be installed and operated in an environment with an ambient temperature rating between 0 to 45 degrees Celsius, and in the case of non-operating conditions, this motor can be stored at a place with an ambient temperature between -20 to 80 degrees Celsius. The Thermal time constant for this motor is 100 minutes, which is the time it takes to adjust its temperature according to the rated nominal temperature range of this motor.
This particular model also comes with a holding brake to prevent the shaft from spinning freely when operating and to prevent the shaft from slipping once a heavy load is applied. This brake has a torque of 45 Nm and has a standard design. The brake requires 14 volts DC to operate and draws a current of up to 0.75 Amperes, making the brake design much more efficient alongside the motor design.
Wake Industrial Warranty
