Product Description

The Bosch Rexroth MAC112C-0-ED-4-C/130-A-0/WI538LV/S005 is a high-performing AC servomotor that should be used with a suitable drive controller. It is compatible with TDM, DSC, and KDS drive controllers. The device should be grounded to the servo amplifier used. The unit is designed to be used only for standard industrial applications. The connecting cables are directly connected to the motor using the connectors on their corresponding flanged sockets. The motor has a protection class of IP 65. The product comes with a rating plate attached to the housing. A second rating plate can be attached to the device, and it should be fitted over the first rating plate using double-sided tape. Additional installation work is not required due to the readymade cables provided by Bosch Rexroth for connecting the motor. The position of the unit is evaluated using the standard incremental encoder mounted on it. The incremental encoder works using square-wave pulses or sinusoidal signals. There are permanent magnets in the rotor of the product. These magnets allow the motor to exhibit low inertia. The product can be used in poor environmental conditions due to its IP 65 protection category. The MAC motor is coated with black-colored paint. An extra layer of paint can be coated as long as the thickness of the layer is less than 40 µm. The device always comprises the power connection and tacho feedback connection. The unit must not be transported vertically because the output shaft is likely to get damaged. The cooling of the product takes place by the natural convection method. The temperature of the unit is monitored using thermo switches. The compact construction of the device contributes to its high power-to-weight ratio.