Product Description
The MAC112C-0-ED-3-C/130-A-1/S014 AC servomotor designed by Bosch Rexroth belongs to the MAC range of similar motors. This motor operates along with selected drive controllers from the same manufacturer. The product depicts excitation by means of permanent magnets in its rotor. This device always encompasses tacho feedback. The unit is delivered with a standard blocking brake. It has an output shaft on side A. This motor does not have any special windings design.The product is not meant to be operated outside the specified ambient conditions. This device features protection against the penetration of water. The unit comes with a shaft sealing ring around its output shaft. Its longitudinal has a maximum excursion amplitude of 0.3 mm with sinusoidal oscillations. This motor has a black prime coat on its housing.
The product can be mounted either horizontally or vertically. This device tends to become very hot during its operation phase. The unit is designed exclusively for commercial use. Its cables must be routed according to the guidelines in its manual. This motor must be used as intended to avoid unfavorable consequences.The product must be properly grounded before its operation. This device comes with a rating plate attached to its housing. This device is delivered with plastic protective covers on its connectors and output shaft. The unit should be free of load on its output shaft when it is picked up. It does not support any encoder connection. This AC servomotor features a cylindrical shaft end as per DIN 332 specifications.
Wake Industrial Warranty
